Co-Star Micro 3 Fuse Holder.
Co-Star the Harrogate based Global supplier to the ICT industry have added the latest Micro 3 fuse holder to their range of installation products for after market Telematics and Mobile Communications Equipment.
The latest vehicles are fitted with an increasing range of on-board connected devices which puts demands on wiring systems installed in confined spaces. The Micro 3 add-a-circuit fuse holder has been designed with this in mind housing two fuse elements in a width of just 15mm allowing more circuits to be added in smaller space. The three spade terminals have a width of 2.8mm and an overall width of 13mm.
The Micro 3 fuse holder can be used with the following fuse ratings:
The part number for the Co-Star Micro 3 add-a-circuit fuse holder is: IFH.18
Please click here for more information>
Co-Star the UK based distributor to the ICT industry are now supplying MICRO 3 blade fuses the new standard for vehicle circuit protection. The MICRO 3 blade fuses have allready been adopted by Ford on their latest models and other vehicle manufacturers are sure to follow.
The MICRO 3 blade fuse is manufactured by Littelfuse and has 3 terminals and 2 fuse elements with a common center terminal. Its sub-miniature design meets the need for more circuits to be protected while utilizing less space and its ability to cope with high temperatures in adverse environments makes the MICRO 3 Fuse the recommended choice for protection in the latest vehicles that have an increasing range of electronics and communication devices.
The Voltage rating of the MICRO 3 blade fuse is 32 VDC with an interrupting rating of 1000A @ 32 VDC. They are designed to operate in temperatures from -40 to +105 degrees.
Co-Star supply the Micro 3 blade fuses in the following ampeges: 5amp which has a beige housing, 7.5amp which has a brown housing, 10amp which has a red housing and 15amp has a blue housing.
The part numbers are as follows:
For more information and to place an order please click here>