Tag Archives: heat-shrink solder terminal

Co-Star Heat-Shrink Solder Butt Connectors Provide a Fast and Secure Connection in Seconds

Blue Heatshrink Solder Butt Connector for Wire Size 1.5-2.5mm (Pack of 25)

Co-Star the Harrogate based global supplier to the ICT industry have launched a range of adhesive lined heat-shrink butt splice connectors that contain fluxed solder to ensure a secure connection in seconds. The connectors are designed for installing after market Telematics and mobile communications equipment into vehicles and marine equipment.

Mixed Heatshrink Solder Butt Connector pack (WTHPS.PACK)

The heat-shrink solder terminals provide a quick and simple cable joint without having to use any crimping tools. They just require a low temperature heat source  that can be provided by using a hot-air gun, blow-torch or lighter. Once heat is applied the solder melts and makes the connection with the cable and the adhesive inside the terminal makes a secure watertight seal.

The shrink ratio is 2:1 and the sleeves of the terminals are transparent to allow the engineer to inspect them once connected.

The heat-shrink connectors are available in three sizes:

Red 0.5-1mm 22-18 AWG 

Blue 1.5-2.5mm 16-14 AWG

Yellow 3.2-6mm 12-10 AWG

Assorted pack that contains: 5 Red, 5 Blue, 3 Yellow. Part Number: WTPS.PACK